Separated Operating and Visualizing Unit

The ECCO-TERMINAL is a low cost operator panel with 15", 17" or 19 " TFT display and resistive-analogue touchscreen.

The panel is connected to the host computer via USB to transmit the touch signals and DVI-D or VGA. The device is immediately ready for use in DVI mode, no display settings are necessary after initial connection. In VGA mode, an auto-adjust process will be executed on start up. Thereby frequency, phase and image position of the display are synchronised automatically with the video signal. The values can be adjusted in detail with pushbuttons at rear side.

The devices are completely maintenance-free since they do not contain any rotating parts.